Product ID:L-TEC 65 (SEE SUPP DATA)
MSDS Date:04/01/1986
FSC:3439
NIIN:00-434-4847
MSDS Number: BGSQD

L-TEC WELDING & CUTTING SYSTEMS

ASHTABULA, OH 44004

Emergency Phone: 216-992-1265

Info Phone: 216-992-1265

Cage: DO412

L-TEC WELDING AND CUTTING SYSTEMS

710 ASHTABULA, OH 44004 US

Telephone: 216-992-5186

Cage: 55019

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <0.50%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: <2.50%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: <1.50%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <0.50%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.75%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

ALUMINUM

CAS: 7429-90-5

RTECS: BO0330000

Fraction By Weight: <0.50%

OSHA PEL 5 MG/M3 WELD FUME

ACGIH TLV: 5 MG/M3 WELD FUME

TANTALUM

CAS: 7440-25-7

RTECS: WW5505000

Fraction By Weight: <0.50%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; DUST; 9192

ZIRCONIUM

CAS: 7440-67-7

RTECS: ZH7070000

Fraction By Weight: <0.50%

OSHA PEL 5 MG/M3/10 STEL

ACGIH TLV: 5 MG/M3/10 STEL;9192

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: TO 100%

OSHA PEL 10 MG FE/M3 TOTAL

ACGIH TLV: 5 MG FE*2O*3/M3

MFR STATES THAT ALL PRODUCTS COVERED BY MSDS MAY NOT

RTECS: 9999999ZZ

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS NOT HAZARDOUS UNTIL IN USE.
WELDING CREATS METAL OXIDE FUMES CREATING METAL OXIDE FEVER AND
WITH CHRONIC BREATHING MAY CAUSE PERMANENT PULMONARY DISFUNCTION.
OTHER HAZARDS ARE ARC-RAYS (ULT RA VIOLET LIGHT),ELECTRIC
SHOCK,NOISE,THERMAL BURNS.
Effects of Overexposure:METAL FUMES:METALLIC TASTE,DIZZINESS,NAUSEA.
ARC RAYS:SUNBURN OF UNPROTECTED SKIN, PERMANENT VISION LOSS.
Medical Cond Aggravated by Exposure:PULMONARY DISFUNCTION.

First Aid:METAL FUME FEVER:REMOVE FROM EXPOSURE. GIVE OXYGEN IF
NEEDED,GET MEDICAL ATTENTION. ARC RAY BURNS:TREAT AS SUNBURN. GET
MEDICAL CARE FOR EYES. ELECTIC SHOCK:TURN OFF POWER. GIVE CPR OR
ARTIFICIAL RESP IRATION AS NEEDED. GET IMMEDIATE MEDICAL ATTENTION.

Flash Point:NONE
Extinguishing Media:NON-FLAMMABLE. USE MEDIA APPROPRIATE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WELDING ARCS,SPARKS,ETC. MAY IGNITE
COMBUSTABLES.

Spill Release Procedures:SWEEP UP OR PICK UP BEING CAREFULE NOT TO
CAUSE UNNECESSARY DUST.
Neutralizing Agent:NONE

Handling and Storage Precautions:NO SPECIAL STORAGE CONDITIONS.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR WHEN WELDING
IN ENCLOSED AREA AND/OR EXPOSED ABOVE PEL/TLV.
Ventilation:USE COMBINATION OF GENERAL VENTILATION AND LOCAL EXHAUST TO
KEEP EXPOSURE BELOW TLV/PEL.
Protective Gloves:WELDERS GLOVES.
Eye Protection:DARK GLASS PER ANSI Z49.1 IN FACE SHIELD
Other Protective Equipment:CLOTHING TO PROTECT AGAINST ULTRA VIOLET &
THERMAL BURNS.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. USE GOOD
LIFTING TECHNIQUES.
Supplemental Safety and Health
MSDS ALSO COVERS L-TEC 29S,82,83,HI-84,85,85A,86,87HP,296,EASY GRIND.

Solubility in Water:NIL
Appearance and Odor:COPPER COATED OR BARE STEEL WIRE.

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:METAL FUMES,METAL OXIDES,CARBON AND
NITROGEN OXIDES.

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.